[c-nsp] ISO recomendation question...

[Justin M. Streiner]

On Wed, 14 Jul 2010, Rich Sena wrote:

> Looking for some advice on ISO to support a 6513 that is currently running 
> s72033-jk9sv-mz.122-18.SXD6.bin - we are going to add a 10G card 
> (WS-X6708-10GE CEF720 8 port 10GE with DFC)
>
> The switch is a data center core and has a twin that it works HA via HSRP for 
> all the data center subnets.

I think you will need to upgrade to a newer IOS to get support for that 
module.  The link below suggests that you need at least 12.2(18)SXF5.

http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/ios/12.2SX/release/notes/hardware.html#wp3743782

I'm running 12.2(33)SXH5 and have several 6708s in service.  Everthing 
seems to work fine.

jms

> Has the following
>  1   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
>   2   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
>   3   24  CEF720 24 port 1000mb SFP              WS-X6724-SFP
>   7    2  Supervisor Engine 720 (Active)         WS-SUP720-BASE
>   8    2  Supervisor Engine 720 (Hot)            WS-SUP720-BASE
>   9    8  Network Analysis Module                WS-SVC-NAM-2
>  12    4  SLB Application Processor Complex      WS-X6066-SLB-APC
>  13    1  SSL Module                             WS-SVC-SSL-1
>
>
> -- 
> Rich Sena - ras at thick.net
> ThickNET Consulting
> "On the way to understanding; you understand, and forget."
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>