[c-nsp] Cisco Console access server

[venkat]

Hi,

 Not sure, if i am posting on the right thread.
 Is there any way to change the default (reverse) telnet port number
on Cisco console access server (2500 series)? Checked some Cisco doc and
it doesn't help.

For eg;

"telnet <console access ip> 2001" connects to the console of the device
connected to port 1. For some reason, the device has to assume the base
port# starts from 10000.... say, " telnet <console access ip> 10001" should
connect to console connected to the 1st port. is there any way to make this
change?

Thanks,
Venkat