[c-nsp] Cisco Console access server

[David Prall]

NAT

--
http://dcp.dcptech.com


> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of venkat
> Sent: Thursday, July 29, 2010 9:28 AM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] Cisco Console access server
> 
> Hi,
> 
>  Not sure, if i am posting on the right thread.
>  Is there any way to change the default (reverse) telnet port number
> on Cisco console access server (2500 series)? Checked some Cisco doc
> and
> it doesn't help.
> 
> For eg;
> 
> "telnet <console access ip> 2001" connects to the console of the device
> connected to port 1. For some reason, the device has to assume the base
> port# starts from 10000.... say, " telnet <console access ip> 10001"
> should
> connect to console connected to the 1st port. is there any way to make
> this
> change?
> 
> Thanks,
> Venkat
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/