[c-nsp] WS-X6148A-GE-45AF is not powering up

Dmitry Valdov dv at dv.ru
Tue Jun 1 09:24:47 EDT 2010


Hello,

This is the answer:
==
1    WS-X6148A-GE-45AF   112.56  2.68     -     -     on    off (Diagnostic
Failure)
==

Try to reinsert the card. If it doesn't help, replace it.


On Tue, 1 Jun 2010, Renelson Panosky wrote:

> COSW02-2165-FRED#sho ver
> Cisco IOS Software, s3223_rp Software (s3223_rp-IPBASEK9-M), Version
> 12.2(33)SXH6, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2009 by Cisco Systems, Inc.
> Compiled Thu 15-Oct-09 11:50 by prod_rel_team
>
> ROM: System Bootstrap, Version 12.2(17r)SX3, RELEASE SOFTWARE (fc1)
>
> COSW02-2165-FRED uptime is 1 day, 4 hours, 41 minutes
> Uptime for this control processor is 1 day, 4 hours, 42 minutes
> Time since COSW02-2165-FRED switched to active is 1 day, 4 hours, 41 minutes
> System returned to ROM by  power cycle at 04:28:08 EDT Mon May 31 2010 (SP
> by power on)
> System restarted at 04:30:36 EDT Mon May 31 2010
> System image file is "sup-bootdisk:s3223-ipbasek9-mz.122-33.SXH6.bin"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> COSW02-2165-FRED#sho power
> system power redundancy mode = redundant
> system power total =     3795.12 Watts (90.36 Amps @ 42V)
> system power used =       934.08 Watts (22.24 Amps @ 42V)
> system power available = 2861.04 Watts (68.12 Amps @ 42V)
>                        Power-Capacity PS-Fan Output Oper
> PS   Type               Watts   A @42V Status Status State
> ---- ------------------ ------- ------ ------ ------ -----
> 1    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
> 2    WS-CAC-4000W-US    3795.12 90.36  OK     OK     on
>                        Pwr-Allocated  Oper
> Fan  Type               Watts   A @42V State
> ---- ------------------ ------- ------ -----
> 1    WS-C6509-E-FAN      150.36  3.58  OK
>                        Pwr-Requested  Pwr-Allocated  Admin Oper
> Slot Card-Type          Watts   A @42V Watts   A @42V State State
> ---- ------------------ ------- ------ ------- ------ ----- -----
> 1    WS-X6148A-GE-45AF   112.56  2.68     -     -     on    off (Diagnostic
> Failure)
> 2    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> 3    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> 4    WS-X6148A-GE-45AF   112.56  2.68   112.56  2.68  on    on
> 5    WS-SUP32-GE-3B      154.98  3.69   154.98  3.69  on    on
> 6    WS-X6148A-GE-45AF   154.98  3.69   154.98  3.69  on    on
>                        Inline         Inline         Inline         Inline
>                        Pwr-Requested  Pwr-Allocated  Local-Pwr-Pool Power
> Slot Card-Type          Watts   A @42V Watts   A @42V Watts   A @42V Status
> ---- ------------------ ------- ------ ------- ------ ------- ------
> ----------
> 1    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> Unknown
> 2    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> On
> 3    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> On
> 4    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> On
> 6    WS-F6K-48-AF          -     -        -     -       34.61  0.82
> On
> COSW02-2165-FRED#
>
>
> Sho ver
> If you require further assistance please contact us by sending email to
> export at cisco.com.
>
> cisco WS-C6509-E (R7000) processor (revision 1.2) with 227328K/34816K bytes
> of memory.
> Processor board ID SMG1049N671
> R7000 CPU at 300Mhz, Implementation 0x27, Rev 3.3, 256KB L2, 1024KB L3 Cache
> Last reset from power-on
> 2 Virtual Ethernet interfaces
> 249 Gigabit Ethernet interfaces
> 1915K bytes of non-volatile configuration memory.
>
> 65536K bytes of Flash internal SIMM (Sector size 512K).
> Configuration register is 0x2102
>
> COSW02-2165-FRED#
>
> On Tue, Jun 1, 2010 at 8:53 AM, Anton Turygin <pa3op at tsua.net> wrote:
>
>> Hello,
>>
>> Please show the output of "show ver" command.
>>
>>
>> On Tue, 1 Jun 2010, Renelson Panosky wrote:
>>
>>   Hello All
>>>
>>> One of my blade is not powering up but i can't remember the command to
>>> power
>>> it back up.  Can some one please help me ? The sho mod command is below.
>>>
>>> #sho mod
>>> Mod Ports Card Type                              Model              Serial
>>> No.
>>> --- ----- -------------------------------------- ------------------
>>> -----------
>>>  1   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
>>> SAL1017L82X
>>>  2   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
>>> SAD093905SP
>>>  3   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
>>> SAD093900TK
>>>  4   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
>>> SAL1011FSAE
>>>  5    9  Supervisor Engine 32 8GE (Active)      WS-SUP32-GE-3B
>>> SAD0939052K
>>>  6   48  48-port 10/100/1000 RJ45 EtherModule   WS-X6148A-GE-45AF
>>> SAL1008ECF3
>>>
>>> Mod MAC addresses                       Hw    Fw           Sw
>>> Status
>>> --- ---------------------------------- ------ ------------ ------------
>>> -------
>>>  1  0017.94da.a540 to 0017.94da.a56f   2.4   8.4(1)       8.7(0.22)BUB Ok
>>>  2  0015.c649.4c00 to 0015.c649.4c2f   1.2   8.4(1)       8.7(0.22)BUB Ok
>>>  3  0015.c649.d300 to 0015.c649.d32f   1.2   8.4(1)       8.7(0.22)BUB Ok
>>>  4  0017.0eb2.5680 to 0017.0eb2.56af   2.0   8.4(1)       8.7(0.22)BUB Ok
>>>  5  0013.809d.e556 to 0013.809d.e561   4.2   12.2(18r)SX2 12.2(33)SXH6 Ok
>>>  6  0017.0eb1.8a80 to 0017.0eb1.8aaf   2.0   8.4(1)       8.7(0.22)BUB
>>> PwrDown
>>>
>>> Mod  Sub-Module                  Model              Serial       Hw
>>> Status
>>> ---- --------------------------- ------------------ ----------- -------
>>> -------
>>>  1  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1005C1WY  2.2    Ok
>>>  2  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD093903ZR  1.2    Ok
>>>  3  IEEE Voice Daughter Card    WS-F6K-GE48-AF     SAD0938067D  1.2    Ok
>>>  4  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1010FGJL  2.0    Ok
>>>  5  Policy Feature Card 3       WS-F6K-PFC3B       SAD0938037W  2.1    Ok
>>>  5  Cat6k MSFC 2A daughterboard WS-F6K-MSFC2A      SAD093804E3  3.0    Ok
>>>  6  IEEE Voice Daughter Card    WS-F6K-48-AF       SAL1008EB9X  2.0
>>> PwrDown
>>>
>>> Mod  Online Diag Status
>>> ---- -------------------
>>>  1  Pass
>>>  2  Pass
>>>  3  Pass
>>>  4  Pass
>>>  5  Pass
>>>  6  Not Applicable
>>> _______________________________________________
>>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>>
>>>
>> --
>> RAZ-UANIC
>> RAZ-RIPE
>> Technological Systems CJSC
>> Senior Network Engineer
>>
>>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

-- 
Dmitry Valdov
CCIE #15379 (R&S and SP)


More information about the cisco-nsp mailing list