[c-nsp] RES: Load Configuration From Flash

[Christopher Hunt]

On 6/1/2010 9:00 AM, cisco-nsp-request at puck.nether.net wrote:
> Send cisco-nsp mailing list submissions to
> 	cisco-nsp at puck.nether.net
>
> To subscribe or unsubscribe via the World Wide Web, visit
> 	https://puck.nether.net/mailman/listinfo/cisco-nsp
> or, via email, send a message with subject or body 'help' to
> 	cisco-nsp-request at puck.nether.net
>
> You can reach the person managing the list at
> 	cisco-nsp-owner at puck.nether.net
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of cisco-nsp digest..."
>
>
> Today's Topics:
>
>     1. Re: RES:  Load Configuration From Flash (Jeff Fitzwater)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Tue, 1 Jun 2010 11:04:58 -0400
> From: Jeff Fitzwater<jfitz at Princeton.EDU>
> To: Mohammad Khalil<eng_mssk at hotmail.com>
> Cc: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] RES:  Load Configuration From Flash
> Message-ID:<74732422-4348-44FB-8D80-E0D8059823DF at Princeton.EDU>
> Content-Type: text/plain;	charset=iso-8859-1
>
> Does that device support the FORMAT command to redo the NVRAM?
>
> Jeff
> On Jun 1, 2010, at 10:55 , Mohammad Khalil wrote:
>
>> The issue is that i can start the router and the IOS is loaded successfully
>> when i type anything and save it such as a hostname or interface description and reload the router i find the router back to scratch which means that there is no configuration file saved
>>
>>
>> Subject: Re: [c-nsp] RES: Load Configuration From Flash
>> From: jfitz at princeton.edu
>> Date: Tue, 1 Jun 2010 10:44:20 -0400
>> CC: leonardo.souza at nec.com.br; cisco-nsp at puck.nether.net
>> To: eng_mssk at hotmail.com
>>
>> I am guessing you are in ROM MON mode and need to get the IOS loaded and then the config.
>>
>> I believe you need to do...
>>
>> boot system flash (any sub device goes here)
>>
>>
>> Jeff
>>
>> On Jun 1, 2010, at 09:45 , Mohammad Khalil wrote:
>>
>>
>> The current IOS is c2600-advipservicesk9-mz.124-18e.bin
>>
>> i tried more than one IOS image and i am not able to find the right image because when i issue the command boot , see the output below
>> Router(config)#boot ?
>>   bootstrap  Bootstrap image file
>>   host       Router-specific config file
>>   network    Network-wide config file
>>   system     System image file
>>
>> Thanks
>>
>> Subject: RES: [c-nsp] Load Configuration From Flash
>> D! ate: Tue, 1 Jun 2010 10:02:28 -0300
>> From: leonardo.souza at nec.com.br
>> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
>>
>> It is supposed to work...
>> Did you issue the following command?
>>
>> boot config disk0:startup-config nvbypass
>>
>> Which version are you using?
>>
>>
>>
>> -----Mensagem original-----
>> De: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Mohammad Khalil
>> Enviada em: ter?a-feira, 1 de junho de 2010 09:12
>> Para: cisco-nsp at puck.nether.net
>> Assunto: [c-nsp] Load Configuration From Flash
>>
>>
>> hi all
>> i have Cisco 2621XM
>> the NVRAM is corrupted and i want to load the configuration file from flash
>> i looked for the command boot config
>> but i cannot find the appropriate image for the router to do this
>>
>> Thanks


It seems likely that your Config Register setting is set to ignore the 
NVRAM config.  Check your "show version" output and make sure that the 
config_reg shows something like :


rtr-2>sh ver
Cisco IOS Software, 7200 Software ...
...
Configuration register is 0x2102

Cheers,
Christopher Hunt