[c-nsp] RES: Load Configuration From Flash

[Mohammad Khalil]

Dears the configuration register value is 0x3922
which means i just changed the baud rate to 115200
anyway what i am looking for , is there any IOS image that supports the boot config command on the Cisco 2621XM
Thanks

> Date: Tue, 1 Jun 2010 11:45:58 -0700
> From: dharmachris at gmail.com
> To: jfitz at Princeton.EDU
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] RES:  Load Configuration From Flash
> 
> 
> 
> On 6/1/2010 9:00 AM, cisco-nsp-request at puck.nether.net wrote:
> > Send cisco-nsp mailing list submissions to
> > 	cisco-nsp at puck.nether.net
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > 	https://puck.nether.net/mailman/listinfo/cisco-nsp
> > or, via email, send a message with subject or body 'help' to
> > 	cisco-nsp-request at puck.nether.net
> >
> > You can reach the person managing the list at
> > 	cisco-nsp-owner at puck.nether.net
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of cisco-nsp digest..."
> >
> >
> > Today's Topics:
> >
> >     1. Re: RES:  Load Configuration From Flash (Jeff Fitzwater)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Tue, 1 Jun 2010 11:04:58 -0400
> > From: Jeff Fitzwater<jfitz at Princeton.EDU>
> > To: Mohammad Khalil<eng_mssk at hotmail.com>
> > Cc: cisco-nsp at puck.nether.net
> > Subject: Re: [c-nsp] RES:  Load Configuration From Flash
> > Message-ID:<74732422-4348-44FB-8D80-E0D8059823DF at Princeton.EDU>
> > Content-Type: text/plain;	charset=iso-8859-1
> >
> > Does that device support the FORMAT command to redo the NVRAM?
> >
> > Jeff
> > On Jun 1, 2010, at 10:55 , Mohammad Khalil wrote:
> >
> >> The issue is that i can start the router and the IOS is loaded successfully
> >> when i type anything and save it such as a hostname or interface description and reload the router i find the router back to scratch which means that there is no configuration file saved
> >>
> >>
> >> Subject: Re: [c-nsp] RES: Load Configuration From Flash
> >> From: jfitz at princeton.edu
> >> Date: Tue, 1 Jun 2010 10:44:20 -0400
> >> CC: leonardo.souza at nec.com.br; cisco-nsp at puck.nether.net
> >> To: eng_mssk at hotmail.com
> >>
> >> I am guessing you are in ROM MON mode and need to get the IOS loaded and then the config.
> >>
> >> I believe you need to do...
> >>
> >> boot system flash (any sub device goes here)
> >>
> >>
> >> Jeff
> >>
> >> On Jun 1, 2010, at 09:45 , Mohammad Khalil wrote:
> >>
> >>
> >> The current IOS is c2600-advipservicesk9-mz.124-18e.bin
> >>
> >> i tried more than one IOS image and i am not able to find the right image because when i issue the command boot , see the output below
> >> Router(config)#boot ?
> >>   bootstrap  Bootstrap image file
> >>   host       Router-specific config file
> >>   network    Network-wide config file
> >>   system     System image file
> >>
> >> Thanks
> >>
> >> Subject: RES: [c-nsp] Load Configuration From Flash
> >> D! ate: Tue, 1 Jun 2010 10:02:28 -0300
> >> From: leonardo.souza at nec.com.br
> >> To: eng_mssk at hotmail.com; cisco-nsp at puck.nether.net
> >>
> >> It is supposed to work...
> >> Did you issue the following command?
> >>
> >> boot config disk0:startup-config nvbypass
> >>
> >> Which version are you using?
> >>
> >>
> >>
> >> -----Mensagem original-----
> >> De: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] Em nome de Mohammad Khalil
> >> Enviada em: ter?a-feira, 1 de junho de 2010 09:12
> >> Para: cisco-nsp at puck.nether.net
> >> Assunto: [c-nsp] Load Configuration From Flash
> >>
> >>
> >> hi all
> >> i have Cisco 2621XM
> >> the NVRAM is corrupted and i want to load the configuration file from flash
> >> i looked for the command boot config
> >> but i cannot find the appropriate image for the router to do this
> >>
> >> Thanks
> 
> 
> It seems likely that your Config Register setting is set to ignore the 
> NVRAM config.  Check your "show version" output and make sure that the 
> config_reg shows something like :
> 
> 
> rtr-2>sh ver
> Cisco IOS Software, 7200 Software ...
> ...
> Configuration register is 0x2102
> 
> Cheers,
> Christopher Hunt
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
 		 	   		  
_________________________________________________________________
Hotmail: Trusted email with Microsoft’s powerful SPAM protection.
https://signup.live.com/signup.aspx?id=60969