[c-nsp] Cisco 2600 with async NM-32 sending wrong characters

[Youssef Bengelloun-Zahr]

Hello,

Yes, it is configured on both cons1 and 2 :

line 33 64
 exec-timeout 0 0
 no exec
 transport input telnet
 escape-character 3
 stopbits 1


Here is an output of a show line xx on the console routers :

CONS1.IX1#sh line 33
   Tty Typ     Tx/Rx    A Modem  Roty AccO AccI   Uses   Noise  Overruns
Int
    33 TTY   9600/9600  -    -      -    -    -      0   10668     4/10
-

Line 33, Location: "", Type: ""
Length: 24 lines, Width: 80 columns
*Baud rate (TX/RX) is 9600/9600, no parity, 1 stopbits, 8 databits*
*Status: Ready*
*Capabilities: EXEC Suppressed*
Modem state: Ready
Modem hardware state: CTS* DSR  DTR RTS
Special Chars: Escape  Hold  Stop  Start  Disconnect  Activation
                ^Cx    none   -     -       none
Timeouts:      Idle EXEC    Idle Session   Modem Answer  Session   Dispatch
                never         never                        none     not set
                            Idle Session Disconnect Warning
                              never
                            Login-sequence User Response
                             00:00:30
                            Autoselect Initial Wait
                              not set
Modem type is unknown.
Session limit is not set.
Time since activation: 00:00:01
Editing is enabled.
History is enabled, history size is 10.
DNS resolution in show commands is enabled
Full user help is disabled
Allowed input transports are telnet.
Allowed output transports are pad v120 telnet rlogin ssh.
Preferred transport is telnet.
No output characters are padded
No special data dispatching characters


Y.



2010/6/2 Ian Henderson <ianh at ianh.net.au>

> On Wed, 2 Jun 2010, Youssef Bengelloun-Zahr wrote:
>
>        User-Name = *"CONS2.IX1> ### Login failed"*
>>
>
> Do you have 'no exec' configured under the async line stanza on CONS1 and
> CONS2? The config you posted is for CONS3, which does have it configured.
>
>
>  line 33 64
>>  exec-timeout 0 0
>>  no exec
>>  transport input all
>>  escape-character 3
>>  stopbits 1
>>
>
> Rgds,
>
>
> - I.
>



-- 
Youssef BENGELLOUN-ZAHR ………………………………………………
Ingénieur Réseaux et Télécoms


Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
Tel                 +33 (0) 825 000 720
Tel. direct      +33 (0) 1 77 35 59 14
Tel. portable  +33 (0) 6 22 42 63 80
Email            ybz at 720.fr
……………………………………………………………………………….....www.720.fr