[c-nsp] mst over etherchannel + QoS

[Pavel Skovajsa]

Hello Ivan,

no currently it is not possible to simulate (proper term is actually
emulate) anything else "above" PVST+, as the only switch oriented card
in dynamips is NM-16ESW - which only supports PVST+.

Due to the proprietary hardware used in switches, I don't think you
will find any other emulator that does this (not speaking about the
fact that AFAIK there is no other cisco emulator then dynamips).

-pavel


On Wed, Jun 16, 2010 at 2:44 PM, Ivan Šimko <ivan.simko at gmail.com> wrote:
> Hi all
>
> I'd like to ask You if is possible simulate network in GNS for etherchannel
> with mst and QoS. If not please can You recommned any simulator for?
>
> Thanks a lot
>
> Ivan
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>