[c-nsp] mst over etherchannel + QoS

[Ivan Šimko]

hmmm :-(

thanks a lot

On 16 June 2010 14:35, Pavel Skovajsa <pavel.skovajsa at gmail.com> wrote:

> Hello Ivan,
>
> no currently it is not possible to simulate (proper term is actually
> emulate) anything else "above" PVST+, as the only switch oriented card
> in dynamips is NM-16ESW - which only supports PVST+.
>
> Due to the proprietary hardware used in switches, I don't think you
> will find any other emulator that does this (not speaking about the
> fact that AFAIK there is no other cisco emulator then dynamips).
>
> -pavel
>
>
> On Wed, Jun 16, 2010 at 2:44 PM, Ivan Šimko <ivan.simko at gmail.com> wrote:
> > Hi all
> >
> > I'd like to ask You if is possible simulate network in GNS for
> etherchannel
> > with mst and QoS. If not please can You recommned any simulator for?
> >
> > Thanks a lot
> >
> > Ivan
> > _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
>