[c-nsp] 7606 config issue !!!

[Rodney Dunn]

So we do "care". ;)

Seriously, something like that that doesn't parse on reload is a bug.

Rodney



On 6/21/10 10:46 AM, Phil Mayers wrote:
> On 21/06/10 15:10, Rodney Dunn wrote:
>> Can someone demonstrate exactly what is being entered?
>>
>> I've seen some of these similar bugs fixed.
>
> Interesting. The vlan name one (long-standing irritation of mine) is
> fixed as of at least 12.2(33)SXI4:
>
> core-spare#conf t
> Enter configuration commands, one per line. End with ...
> core-spare(config)#vlan 999
> core-spare(config-vlan)#name test vlan
> ^
> % Invalid input detected at '^' marker.
>
> core-spare(config-vlan)#name "test vlan"
> core-spare(config-vlan)#^Z
> % Applying VLAN changes may take few minutes. Please w
>
> core-spare#sh run vlan 999
> Building configuration...
>
> Current configuration:
> !
> vlan 999
> name "test vlan"
> end
>
>
> It *used* to nvgen, under e.g. 12.2(18)SXF (6, I think):
>
> vlan 999
> name test vlan
> end
>
> ...which obviously failed to parse on reload. It's good that it's fixed.
> The "ip route name" seems to be fixed in that release too, though that's
> not a feature we use:
>
> core-spare#sh run partition ip-static-routes
> Building configuration...
>
> Current configuration : 116 bytes
> !
> Configuration of Partition - ip-static-routes
> !
> !
> ip route 1.2.3.4 255.255.255.255 Null0 name "foo bar"
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/