[c-nsp] Looping up far end smartjack

[Richey]

I was hoping to avoid having to go to the colo late at night.   We did
finally hear from the customer. A breaker had tripped and they person on
duty had no idea where the breakers were in the building.  

Richey

-----Original Message-----
From: joe mcguckin [mailto:joe at via.net] 
Sent: Thursday, June 24, 2010 12:58 AM
To: Richey
Subject: Re: [c-nsp] Looping up far end smartjack

I dont think you can't loop NIU or intermediate repeaters with a PA-MC-T3 -
you'll need a Sunrise or similar testset to do that,


Joe McGuckin
ViaNet Communications

joe at via.net
650-207-0372 cell
650-213-1302 office
650-969-2124 fax



On Jun 23, 2010, at 8:00 PM, Richey wrote:

> I've been looking around and can't find a clear cut answer to this
question.
> Is it possible to loop up a far end T1 smart jack using a PA-MC-T3 in a
> 7206?   Often I open a ticket with the lec and they will take an hour or
two
> to let us know if they can loop the smart jack up or not.  In a brilliant
> move the customer's primary and secondary contact numbers are numbers on
the
> circuit so no one can call to verify that they have power at their site. 
> 
> 
> 
> 
> 
> Richey
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/