[c-nsp] Simple VLAN Tag question

[Nick Voth]

Thanks Tim. I knew it had to be simple. Yes, we have IP-Plus image or
higher.

Thanks again!

-Nick



From: Tim Jackson <jackson.tim at gmail.com>
Date: Mon, 28 Jun 2010 10:10:34 -0500
To: Nick Voth <nvoth at estreet.com>
Cc: <cisco-nsp at puck.nether.net>
Subject: Re: [c-nsp] Simple VLAN Tag question

interface FastEthernet0/1
 no shutdown
!
interface FastEthernet0/1.301
 encapsulation dot1q 301
 ip address 1.2.3.4 255.255.255.0
!

IIRC, you may need IP-Plus or a desktop image (d-mz) to do dot1q on 2600..
(I could be wrong)..

--
Tim

On Mon, Jun 28, 2010 at 9:29 AM, Nick Voth <nvoth at estreet.com> wrote:
> Hello folks,
> 
> Please forgive the newbie question. I've looked online in various places but
> can't just seem to find a simple sample config.
> 
> I've never really had to deal with VLANs on the Cisco IOS before. I have a
> situation where we need to plug a 2620 in to an Ethernet LAN and tag the
> traffic with 301.
> 
> Does anyone have a sample config that shows the creation of the VLAN and how
> to tag the traffic?
> 
> Thanks very much,
> 
> -Nick Voth
> 
> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/