[c-nsp] Looping up far end smartjack

Richey mylists at battleop.com
Mon Jun 28 22:41:13 EDT 2010


I just thought about that for a second..   If the T1 is down then the router
will be down as well.   In the event of a power outage I still can't tell if
the power is off or the T1 is down.    If I can hit the smart jack and not
the router then I could assume it's a power outage.

 

Richey

 

From: Adam Korab [mailto:adam.korab at gmail.com] 
Sent: Monday, June 28, 2010 7:01 PM
To: Richey
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Looping up far end smartjack

 

On Thu, Jun 24, 2010 at 9:17 AM, Richey <mylists at battleop.com> wrote:

I was hoping to avoid having to go to the colo late at night.   We did
finally hear from the customer. A breaker had tripped and they person on
duty had no idea where the breakers were in the building.

 

T1 duty was long ago in a galaxy far away for me...but aren't NIUs all
line-powered?  That is, wouldn't you want to loop the remote CSU/DSU anyway
to confirm power?

 

--Adam



More information about the cisco-nsp mailing list