[c-nsp] 7606 RSP720

[Sharlon Carty]

Hello,

 

I have a police-map applied to a vlan interface set to 10mbit. Works fine, as long as traffic is routed on the CEF720 48 port module. But the moment traffic is routed on the RSP720, traffic is above the 10mbit. 

Is there something on the RSP720 that needs to enabled?  

 

Here is my config: 

 

policy-map 10Mbs

  class class-default

    police 10000000 1875000 3750000 conform-action transmit exceed-action drop violate-action drop

 

interface Vlan123

 bandwidth 10000

 ip address x.x.x.x x.x.x.x

 load-interval 30

 service-policy input 10Mbs

 service-policy output 10Mbs

 

interface GigabitEthernet1/0/0

 switchport

 switchport trunk allowed vlan 123

 switchport mode trunk

 mls qos vlan-based

 mls qos trust dscp

 

Trunk port is on a SIP-600.