[c-nsp] BGP IPV6 strange message

[Cory Ayers]

Hello Tomas,

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Tomas Lynch
> Sent: Thursday, March 04, 2010 1:40 PM
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] BGP IPV6 strange message
> 
> I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and
> c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is
> there (e.g. ipv6 cef) but BGP keeps telling me:
> 
> 7200(config)#router bgp $ASN1
> 7200(config-router)#neigh X::X remote-as $ASN2
> % Link local peer outside address-family scope
> 7200(config-router)#address-family ipv6 unicast
> % BGP: Error initializing topology
> 
> I can ping to the neighbor X::X from X::(X+1). The routers are
> connected using gigabit ports.
> 
> I have google the errors but there is nothing. Anybody else had this
> problem before?

If you have a CCO account, take a look at feature navigator:  www.cisco.com/go/fn

A comparison of SP Services with Advanced IP Services shows numerous feature differences that you may not have expected if you came from an older train with Service Provider (-p-mz) feature set.  SP Services != Service Provider

Here are a few features unique to Advanced IP Services:
IPv6 Routing - EIGRP Support
IPv6 Routing: IS-IS Multitopology Support for IPv6
IPv6 Routing: IS-IS Support for IPv6
IPv6 Routing: Multiprotocol BGP Extensions for IPv6
IPv6 Routing: Multiprotocol BGP Link-local Address Peering
IPv6 Routing: OSPF for IPv6 (OSPFv3)
IPv6 Routing: RIP for IPv6 (RIPng)
IPv6 Routing: Route Redistribution
IPv6 Routing: Static Routing
IPv6 Security: Secure Shell SSH support over IPv6

Hope that helps!
Cory