[c-nsp] BGP IPV6 strange message

[Tomas Lynch]

Leah, Cory and Gerald, thanks for your help, it was an IOS issue, no
problems with c7200-advipservicesk9-mz.122-33.SRD4.bin

On Thu, Mar 4, 2010 at 6:15 PM, Cory Ayers <cayers at ena.com> wrote:
> Hello Tomas,
>
>> -----Original Message-----
>> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
>> bounces at puck.nether.net] On Behalf Of Tomas Lynch
>> Sent: Thursday, March 04, 2010 1:40 PM
>> To: cisco-nsp at puck.nether.net
>> Subject: [c-nsp] BGP IPV6 strange message
>>
>> I'm trying to setup an IPv6 neighbor on a 7206VXR with NPE-G1 and
>> c7200-spservicesk9-mz.122-33.SRD4.bin. All the needed IPv6 config is
>> there (e.g. ipv6 cef) but BGP keeps telling me:
>>
>> 7200(config)#router bgp $ASN1
>> 7200(config-router)#neigh X::X remote-as $ASN2
>> % Link local peer outside address-family scope
>> 7200(config-router)#address-family ipv6 unicast
>> % BGP: Error initializing topology
>>
>> I can ping to the neighbor X::X from X::(X+1). The routers are
>> connected using gigabit ports.
>>
>> I have google the errors but there is nothing. Anybody else had this
>> problem before?
>
> If you have a CCO account, take a look at feature navigator:  www.cisco.com/go/fn
>
> A comparison of SP Services with Advanced IP Services shows numerous feature differences that you may not have expected if you came from an older train with Service Provider (-p-mz) feature set.  SP Services != Service Provider
>
> Here are a few features unique to Advanced IP Services:
> IPv6 Routing - EIGRP Support
> IPv6 Routing: IS-IS Multitopology Support for IPv6
> IPv6 Routing: IS-IS Support for IPv6
> IPv6 Routing: Multiprotocol BGP Extensions for IPv6
> IPv6 Routing: Multiprotocol BGP Link-local Address Peering
> IPv6 Routing: OSPF for IPv6 (OSPFv3)
> IPv6 Routing: RIP for IPv6 (RIPng)
> IPv6 Routing: Route Redistribution
> IPv6 Routing: Static Routing
> IPv6 Security: Secure Shell SSH support over IPv6
>
> Hope that helps!
> Cory
>