[c-nsp] N7K tcam handling

[Tim Stevenson]

Hi Tony,
The FIB TCAM is already dynamically allocated as of 4.2 (ie, no 
static/fixed allocation, blocks of various width entries grow/shrink 
as necessary). At the control plane, you can control the max prefixes 
for each, which naturally limits the h/w consumption to those numbers as well.

Hope that helps,
Tim


At 11:28 AM 3/9/2010, Tony Varriale clamored:
><snip>
>And I believe you are going to allow configurable allocation between ipv4
>and ipv6 space.
>
>tv
>
>_______________________________________________
>cisco-nsp mailing list  cisco-nsp at puck.nether.net
><https://puck.nether.net/mailman/listinfo/cisco-nsp>https://puck.nether.net/mailman/listinfo/cisco-nsp
>archive at 
><http://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pipermail/cisco-nsp/




Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.