[c-nsp] disabling Env. monitor reports on c12008

[Michael K. Smith - Adhost]

> -----Original Message-----
> From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-
> bounces at puck.nether.net] On Behalf Of Primoz Jeroncic
> Sent: Wednesday, March 17, 2010 1:14 AM
> To: Cisco Mailing list
> Subject: [c-nsp] disabling Env. monitor reports on c12008
> 
> Hi guys
> 
> I have c12008 with 2 power supplies, from which one is turned off and
> is
> in the box only as backup which could be switched on manually if
> something
> would go wrong with primary one. Now I'm getting whole bunch of errors
> in
> log that volts level with this power supply has reached critical level
> (which is perfectly normal if it's switched off).
> Does anyone have idea, how to disable this check (just for slot 24,
not
> globally, since I would still like to get warnings about other slots),
> so
> my logs wouldn't be full of crap like this (one every 15mins):
> 
> Mar 17 08:55:52: %ENV_MON-2-VOLTAGE: Card 5v supply(slot 24) volts has
> reached CRITICAL level at 0 m(V)
> 
> Thanks for help.
> 
>From (config)# hw-module slot 24 shutdown

Just make sure you have the right slot.  :-)

Mike