[c-nsp] Cisco 6509 SUP2-MSFC2 and PCMCIA Flash

[Leah Lynch (Contractor)]

You may check Cisco's site, I remember having this issue, and I had to
upgrade IOS, Catos, or rommon. I cant remember what exactly had to be
upgraded, because it was a few years ago.

Leah

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Larry Stites
Sent: Wednesday, March 17, 2010 12:03 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Cisco 6509 SUP2-MSFC2 and PCMCIA Flash

Is it possible that 128mb is too large amount of flash memory for the
S2-MSFC2 to recognize? Does the Supervisor module only accommodate 64Mb
max?


We're having trouble with (MEM-C6K-ATA-1-128M) PCMCIA 128MB memory cards
for
the S2-MSFC2. No matter which of (4) S2-MSFC2 we put the memory cards in
we
get:

%Error opening slot0:/ (No device available)

which is the same error as if nothing is in that slot.
(We tried disk0:  as well)

Is there something needed to be done to these to make the
MEM-C6K-ATA-1-128M
usable/recognizable with these S2's?


Thanks


~.~
 

Best regards,


Larry E. Stites
Northern California Networks, Inc.
Nevada City, Calif. 95959



_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/