[c-nsp] per-user static routes getting stuck

[Jon Lewis]

I have a 7206vxr running c7200-js-mz.123-23 doing a mix of T1 aggregation 
and PPPoA/PPPoE DSL termination.  Lately, we've been seeing an issue with 
one particular PPPoE DSL user.  They have a static IP and a /30 via 
their RADIUS profile.  When this user disconnects, the per-user static 
route for their subnet isn't getting cleared from the routing table. 
Their static /32 does get cleared.  The only way I've found to clear the 
/30 is to enter the route into the config, and then remove it from the 
config.  With an uptime of 2.5 years, I should probably just upgrade to 
12.3(26) and reboot...but I wonder if anyone else has seen this?

----------------------------------------------------------------------
  Jon Lewis                   |  I route
  Senior Network Engineer     |  therefore you are
  Atlantic Net                |
_________ http://www.lewis.org/~jlewis/pgp for PGP public key_________