[c-nsp] MPLS TE traffic forwarding.

[Mounir Mohamed Ali]

You can also forwarding the L2VPN traffic of particular Pseudowire over
designated Traffic-Engineer tunnel using the Tunnel Selection feature , this
feature was  introduced in IOS release 12.0(23)S, it's not available in
some  12.2SB releases but it in 12.2SRA and ongoing it does.

Ex

pseudowire-class PW-C1
 encapsulation mpls
 preferred-path interface Tunnel100

http://www.cisco.com/en/US/docs/ios/12_2sr/12_2sra/feature/guide/srtunsel.html

Also in 12.2SR we got another static way to forwarding particular L2VPN PW
across designated LSP.
http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srstatpw.html#wp1060910

http://www.cisco.com/en/US/docs/ios/12_2sr/12_2srb/feature/guide/srstatpw.html#wp1060910

On Thu, Mar 25, 2010 at 1:14 AM, Michael Sprouffske
<msprouffske at yahoo.com>wrote:

> I'm not sure if this has already been posted.
> I'm trying to figure out a concept of the TE tunnel.  It appears that when
> a tunnel is created it will forward all traffic destined for the end point
> down the tunnel.  My question is, is there  a way to create a tunnel and
> have only specific traffic go down the tunnel? If this is already answered
> please give a link for the location.
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Mounir Mohamed, CCIE No.19573(R&S, SP)
Senior Network Engineer, Core Team
NOOR Data Networks, SAE
http://mounirmohamed.wordpress.com
http://www.linkedin.com/in/mounirmohamed