[c-nsp] Replacing redundant Sup720 on Catalyst 6500

[Youssef Bengelloun-Zahr]

Hello John,

Based on your posting, the sup in slot 5 is in STANDBY state, so no worries
to have :-)

FYI :

https://supportforums.cisco.com/docs/DOC-4068/version/1;jsessionid=667B4E9940D21005AC46FD72F7A602B9.node0

Good luck !

Y.



2010/3/25 John Smith <jsmith19365 at yahoo.com>

> We have a 6500 Switch in our network with two SUP720 engines running in SSO
> mode; one engine is Active and the other is in  Standby Hot. The Sup engines
> are in slot 5 and slot 6. We need to replace the card in Slot 5.
>
> Does anyone have a step by step procedure and/or web link on how to replace
> the redundant supervisor card without rebooting the chassis.
>
> Any/all help is much appreciated. Thank you.
>
> We have the following config for the supervisors.
>
> !
> redundancy
> mode sso
> main-cpu
> auto-sync running-config
> auto-sync standard
> !
>
> Switch#show redundancy
> Redundant System Information :
> ------------------------------
>       Available system uptime = 2 year, 7 weeks, 3 days, 8 hours, 33
> minutes
> Switchovers system experienced = 0
>              Standby failures = 0
>        Last switchover reason = none
>
>                 Hardware Mode = Duplex
>    Configured Redundancy Mode = sso
>     Operating Redundancy Mode = sso
>              Maintenance Mode = Disabled
>                Communications = Up
>
> Current Processor Information :
> -------------------------------
>               Active Location = slot 6
>        Current Software state = ACTIVE
>       Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32
> minutes
>                 Image Version = Cisco Internetwork Operating System
> Software
> IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version
> 12.2(18)SXF7, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by cisco Systems, Inc.
> Compiled Thu 23-Nov-06 06:00 by kellythw
>                          BOOT = disk0:,1;
>                   CONFIG_FILE =
>                       BOOTLDR =
>        Configuration register = 0x2102
>
> Peer Processor Information :
> ----------------------------
>              Standby Location = slot 5
>        Current Software state = STANDBY HOT
>       Uptime in current state = 2 year, 7 weeks, 3 days, 8 hours, 32
> minutes
>                 Image Version = Cisco Internetwork Operating System
> Software
> IOS (tm) s72033_rp Software (s72033_rp-ADVIPSERVICESK9_WAN-M), Version
> 12.2(18)SXF7, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by cisco Systems, Inc.
> Compiled Thu 23-Nov-06 06:00 by kellythw
>                          BOOT = disk0:,1;
>                   CONFIG_FILE =
>                       BOOTLDR =
>        Configuration register = 0x2102
>
>
> Thanks!
> -John-
>
>
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>



-- 
Youssef BENGELLOUN-ZAHR ………………………………………………
Ingénieur Réseaux et Télécoms


Technopole de l'Aube  en Champagne - BP 601 - 10901 TROYES  Cedex 9
Agence Paris : 6, rue Charles Floquet - 92120 MONTROUGE
Tel                 +33 (0) 825 000 720
Tel. direct      +33 (0) 1 77 35 59 14
Tel. portable  +33 (0) 6 22 42 63 80
Email            ybz at 720.fr
……………………………………………………………………………….....www.720.fr