[c-nsp] Netflow on multilink

[Rodney Dunn]

IIRC putting them on the members are useless because the switching 
vectors are invoked off the bundle interface so anything packet 
switching related on the members doesn't do anything.

Rodney


On 3/25/10 11:23 PM, Sony Scaria wrote:
> Hi,
>
> I've a ppp multilink configured recently, which I want to  monitor by a  netflow tool. My doubt is whether I should enter the 'ip route-cache flow' command only on interface muiltilink or on member interface (physical interfaces) as well.
>
> Thanks, sony
> Sent via Blackberry®
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/