[c-nsp] Older gear and IPv6

Mikael Abrahamsson swmike at swm.pp.se
Mon Mar 29 11:52:17 EDT 2010


On Mon, 29 Mar 2010, Tim wrote:

> On Wed, Mar 24, 2010 at 04:47:38PM +0100, Gert Doering wrote:
>>  - the GSRs do IPv6 in software on some of the older line cards, and in
>>    hardware on the more recent line cards (I have no GSRs, so I can't say
>>    for sure which ones are which, but E0 is certainly "software" and E3/E4
>>    should be "hardware")
>
> I've heart from a SE, that only Engine 5 linecards do IPv6 in hardware.

Engine 3 as well.

> As we have some GSRs in our network (12410/12416) and linecards from
> Engine 0 to Engine 5, does somebody has experiences with GSR & IPv6 and
> can say which linecards do IPv6 in hardware?

E3 and E5 does it in both directions. As E2 and E4 does only ingress 
routing, any packet egressing an E2 or E4 linecard will be limited by the 
ingress card capabilties. E2 and E4 will ingress route IPv6 in software 
(cpu). When we did tests with E4 I believe we got them up to approx 400 
megabit/s ingress IPv6 and wirespeed egress (was with packets ingressing 
E5 linecard).

-- 
Mikael Abrahamsson    email: swmike at swm.pp.se


More information about the cisco-nsp mailing list