[c-nsp] mpls + ipv4 route

[Matteo Abrile]

Hi,

We have bit confusion because when we use cisco 6500 with mpls + bgp and ospf, if we check tcam we found so:

L3 Forwarding Resources
             FIB TCAM usage:                     Total        Used       %Used
                  72 bits (IPv4, MPLS, EoM)     524288      518838         99%
                 144 bits (IP mcast, IPv6)      262144         329          1%

                     detail:      Protocol                    Used       %Used
                                  IPv4                      292787         56%
                                  MPLS                      226050         43%
                                  EoM                            1          1%

We have 2 full route and some peering but not redistribute bgp in IGP, then we have ospf as IGP and not redistribute ospf in BGP, why we have some route in IPv4 and in MPLS ??
I would have BGP and OSPF only in IPv4 partition of TCAM, how to do it ??

Thanks

Matteo