[c-nsp] circuit degradation/error simulator

[cisconsp at SecureObscure.com]

If you are looking for a commercially supported solution, there is a box
called a "network nightmare" that can simulate most of that stuff.
http://networknightmare.net/
(My understanding is that its just an embedded Linux box)

John


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Marcus.Gerdon
Sent: Wednesday, May 12, 2010 9:00 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] circuit degradation/error simulator

Hi all,

sorry for the not really Cisco-related topic, but the collected
expertise present on this list might once again be the solution.

For some testing I'm looking for a piece of software which is capable of
inserting various degradation and/or errors into a traffic stream.

The setup I thought of is setting up a PC with two NIC which passes
traffic between the interfaces. In the middle the software should be
able to generate packetloss, delay, jitter, fragmentation, reordering
and alike within the traffic stream passed on.

I didn't crawl through the depths of the internet dictionary (aka Google
:)) yet, but maybe someone can point to a piece to look at.

kind regards,

Marcus

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/