[c-nsp] Redistributing External EIGRP routes through MPLS vpn

Luan Nguyen luan at netcraftsmen.net
Tue May 18 08:19:34 EDT 2010


Just put this into Dynamips and didn't have any problem at all.

CE1#
router eigrp 1
 no auto-summary
 !        
 address-family ipv4 vrf BLUE
 redistribute bgp 1 metric 1 1 1 1 1
 network 10.10.10.254 0.0.0.0
 no auto-summary
 autonomous-system 1
 exit-address-family

PE1#
router eigrp 1
 no auto-summary
 !        
 address-family ipv4 vrf BLUE
 network 10.10.10.254 0.0.0.0
 no auto-summary
 autonomous-system 1
 exit-address-family


router bgp 1
!
 address-family ipv4 vrf BLUE
 redistribute eigrp 1
 no auto-summary
 no synchronization
 exit-address-family

Maybe check the EIGRP configuration to see if you have thing like eigrp stub
connected :)

-------------------------------------
Luan Nguyen
Chesapeake NetCraftsmen, LLC.
-------------------------------------


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Joe Maimon
Sent: Monday, May 17, 2010 8:19 PM
To: shimshah at cisco.com
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Redistributing External EIGRP routes through MPLS vpn

Metric Must Be Configured for Routes from Other Autonomous Systems and 
Non-EIGRP Networks

Yes, it is.

Native EIGRP VRF to VRF Redistribution Is Not Supported

Not what I am trying to do.

Thanks,

Joe

Shimol Shah wrote:
> Are you sure you are not running into restriction cited in below section
> of the CCO document ?
>
>
http://www.cisco.com/en/US/docs/ios/12_2t/12_2t15/feature/guide/fteipece.htm
l#wp1027175
>
>
> Shimol Shah
>
>
> On 5/17/10 2:57 PM, Joe Maimon wrote:
>> Hey All,
>>
>> Seems like I have run into a difficulty where CE#1 external EIGRP routes
>> (redistribute connected/redistribute static) are learned by PE#1,
>> redistributed to PE#2, but not redistributed to CE#2
>>
>> CE <-> PE, EIGRP
>>
>> PE <-> PE, MPLS/BGP
>>
>> The workaround is to use network statements, making the EIGRP routes on
>> the CE internal. Those redistribute fine and show up on CE#2 as internal.
>>
>> Am I missing something and is there a simple clean way to redistribute
>> from CE#1 to CE#2 external EIGRP routes?
>>
>> Thanks,
>>
>> Joe
>> _______________________________________________
>> cisco-nsp mailing list cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5123 (20100518) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com


 

__________ Information from ESET NOD32 Antivirus, version of virus signature
database 5123 (20100518) __________

The message was checked by ESET NOD32 Antivirus.

http://www.eset.com
 



More information about the cisco-nsp mailing list