[c-nsp] MRTG

[David Freedman]

Mark Wheadon wrote:
> I am in the process of restricting SNMP access into our CPE.  Does
> anyone know what specific OID's as a minimum MRTG will need to be able
> to add a Cisco ISR device ( I am trying to avoid doing a debug).
> 
Not quite sure what you mean by "minimum MRTG", you could start by only
allowing mib-2 and if you are concerned about routing table being
scraped, just move down to ifMib.

Dave.


> 
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
> 


-- 


David Freedman
Group Network Engineering
Claranet Group