[c-nsp] Fwd: Cisco 7206VXR (NPE-G2) SRD4
Olga
olved at list.ru
Wed May 26 05:17:32 EDT 2010
I think your session is being restarted every 180 seconds, because your keepalives aren't going through. It may happen it you have low MTU and high MSS size for BGP packets, your updates can't get to neighbor and they get queued and keepalives are standing behind updates packets
You will see it with command sh ip bgp neighbor X.X.X.X in the top something like
Keepalives are temporarily in throttle due ...
Check mss size
sh ip bgp neighbors X.X.X.X | i Data
and compare it to mtu on link (plus 40 bytes)
Why it was working before? Maybe MSS was lower on old soft?
More information about the cisco-nsp
mailing list