[c-nsp] Output drops the same in groups of eight

[Mack O'Brian]

As I understood sometime ago was that 6148 modules have common buffers for
1-8, 9-16, 17-24 etc. If the buffer is full and output queue drops the
packet then the same number of drops will show up in all eight-ports for
that buffer.

Mack


On Wed, Nov 3, 2010 at 6:14 PM, ML <ml at kenweb.org> wrote:

> Looking at the output drops of the interfaces on a WS-X6148-GE-TX module I
> noticed the output drops were the same in groups of 8 ports (excluding
> non-connected ports). i.e. 1-8,9-16,17-24, etc
>
> http://pastebin.com/kT7XGsVg for those interested.
>
>
> Is this some sort of architecture artifact?  Makes monitoring a little more
> difficult.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>