[c-nsp] bgp holdtime adjustment

[Chris Evans]

Is the port going down? Or it stays up during this failure.  Different
failures require different mechanisms...
On Nov 9, 2010 8:00 PM, "John Elliot" <johnelliot67 at hotmail.com> wrote:
>
> Hi,
>
> We have 2 upstreams, in two seperate locations(both only advertising
default route to us) - both of our edge routers have a floating static
default to the other edge should we lose bgp - The problem we have is that
if we lose one upstream, it is taking 180sec for that router to lose the bgp
default route(So all connections terminating on that router are down for 3
minutes), and revert to floating static.
>
> Is adjusting the neighbour timers someting to consider to reduce this
downtime?
>
> Thanks in advance.
> _______________________________________________
> cisco-nsp mailing list cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/