[c-nsp] bgp holdtime adjustment

[Chris Evans]

If you wanted you could break the port channel and run equal cost multipath
bgp... then you run bfd over each link..

I agree though. Hold timer is easier and will probably suit you fine..
On Nov 11, 2010 12:10 AM, "John Elliot" <johnelliot67 at hotmail.com> wrote:
>
>>
>> > I would have something like this under L3 Interface to Upstream?:
>> >
>> > bfd interval 100 min_rx 100 multiplier 3
>> >
>> > And under bgp:
>> >
>> > neighbor UPSTREAM fall-over bfd
>>
>> Something like that, the values might be different depending on what
>> platform you're running.
>>
>
> Thanks everyone for the assistance - Upstream does support bfd, but
unfortunately I am running PortChan on 7200, which appears to not support
bfd!(Bugger!)...so looks like we will have to run with lower holdtime.