[c-nsp] 4510 Hardware Question

[Mohlmaster, Jarod]

According to
http://www.cisco.com/en/US/prod/collateral/modules/ps2710/ps5494/product
_data_sheet0900aecd802109ea_ps4324_Products_Data_Sheet.html

It looks like 8-10 do not support E series line cards with a Sup6-E.  So
scratch slots 8-10 as well as your supervisor slots in your
configuration - looks like 5 usable slots with this linecard.  

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Leblanc, Jason
Sent: Thursday, November 11, 2010 12:56 PM
To: 'cisco-nsp at puck.nether.net'
Subject: [c-nsp] 4510 Hardware Question

I have to configure a 4510R-E w/ dual 6E Sup's for a customer that
already has one and is looking for redundancy.  I would like to fully
populate it with the WS-X4648-RJ45V-E blades but the Cisco configurator
says that's not possible. The WS-X4548-GB-RJ45V have an 8:1
oversubscription which I would like to avoid.

Questions:
How many WS-X4648-RJ45V-E blades can I get working in the chassis?
Does it matter which slots (outside of the Supervisor slots)?

Thanks,

//LeBlanc

________________________________
This communication is the property of Qwest and may contain confidential
or privileged information. Unauthorized use of this communication is
strictly prohibited and may be unlawful. If you have received this
communication in error, please immediately notify the sender by reply
e-mail and destroy all copies of the communication and any attachments.
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/