[c-nsp] WS-X6704-10GE and MPLS

[Pete Lumbis]

(replying all this time).

If you have access to the bug toolkit also check out CSCsl72880.

On Sun, Nov 21, 2010 at 11:56 AM, Pete Lumbis <alumbis at gmail.com> wrote:
> I believe that this is because it's a CFC module. It's just telling
> you that hardware forwarding won't happen on the linecard and will
> happen on the RP.
>
> On Sun, Nov 21, 2010 at 11:52 AM, Youssef Bengelloun-Zahr
> <youssef at 720.fr> wrote:
>> The other LC hardware version is 2.9. Both LCs have standard CFC modules, no DFCs.
>>
>> Under CLI, I can see mpls commands and sub-commands.
>>
>> Just wanted to know the meaning of the message That's appeared in the logs, probably purely informational.
>>
>> Can anyone confirm for sure ?
>>
>> Y.
>>
>>
>>
>> Le 21 nov. 2010 à 17:42, Nick Hilliard <nick at foobar.org> a écrit :
>>
>>> On 21/11/2010 16:38, Youssef Bengelloun-Zahr wrote:
>>>> Mod MAC addresses                       Hw    Fw           Sw
>>>> Status
>>>> --- ---------------------------------- ------ ------------ ------------
>>>> -------
>>>>   7  0025.84d7.89cc to 0025.84d7.89cf   3.1   12.2(14r)S5  12.2(33)SXH2 Ok
>>>>
>>> [...]
>>>> No DFC installed on it !
>>>
>>> hardware looks ok then. 3.1 is fine, and so long as you didn't accidentally install a dfc3a, it should be ok.
>>>
>>> Nick
>>
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>