[c-nsp] No DOM support for X2 optics on Cat 4900M?

[Gregor Friedrich]

David Hubbard schrieb:
> I get this on my 4900M's with SR optics 12.2(54)SG:
> 
> If device is externally calibrated, only calibrated values are printed.
> ++ : high alarm, +  : high warning, -  : low warning, -- : low alarm.
> NA or N/A: not applicable, Tx: transmit, Rx: receive.
> mA: milliamperes, dBm: decibels (milliwatts).
> 
>                                  Optical   Optical
>            Temperature  Voltage  Tx Power  Rx Power
> Port       (Celsius)    (Volts)  (dBm)     (dBm)
> ---------  -----------  -------  --------  --------
> Te1/1        31.0       0.00      -2.0      -2.7   
> Te1/2        30.0       0.00      N/A      -40.0   
> Te1/3        31.7       0.00      N/A      -26.5   
> Te1/4        32.5       0.00      -2.7      -2.8   
> Te1/5        35.0       0.00      -2.8      -2.7   
> Te1/6        34.0       0.00      -2.2      -2.0   
> Te1/7        32.0       0.00      -2.3      -2.5    


Thanks David, I got 12.2(54)SG  right now and it works

Gregor

-- 
Gregor Friedrich
System Administration & Webmaster

Technische Universität Dresden
Biotechnology Center
Tatzberg 47/49
01307 Dresden Germany

phone: +49-351-463-40069
email: gregor.friedrich at biotec.tu-dresden.de
webpage: www.biotec.tu-dresden.de