[c-nsp] VPLS Simulation

[Yılmaz Polat]

you can only do AToM on gns. cisco support vpls on specific card and
platforms. eg 7600 series and some specific card on that series.


2010/11/25 Robert Maier <desolationrob at gmail.com>

> the only "switch" you can use in GNS is a NM-16ESW module, i don´t think
> that this module supports VPLS. Maybe you have this option a simulator like
> Boson oder packettracer ?But i think, chances are not good
>
> Am 24.11.2010 23:04, schrieb Mohammad Khalil:
>
> i have looked into GNS3 but it does not support VPLS simulation
>> is there anyway i can simulate VPLS ?
>>
>> Thanks
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>