[c-nsp] VPLS Simulation

[Mohammad Khalil]

Thanks all

> Date: Sat, 27 Nov 2010 13:10:06 +0200
> From: yilmazpolat at gmail.com
> To: desolationrob at gmail.com
> CC: cisco-nsp at puck.nether.net
> Subject: Re: [c-nsp] VPLS Simulation
> 
> you can only do AToM on gns. cisco support vpls on specific card and
> platforms. eg 7600 series and some specific card on that series.
> 
> 
> 2010/11/25 Robert Maier <desolationrob at gmail.com>
> 
> > the only "switch" you can use in GNS is a NM-16ESW module, i don´t think
> > that this module supports VPLS. Maybe you have this option a simulator like
> > Boson oder packettracer ?But i think, chances are not good
> >
> > Am 24.11.2010 23:04, schrieb Mohammad Khalil:
> >
> > i have looked into GNS3 but it does not support VPLS simulation
> >> is there anyway i can simulate VPLS ?
> >>
> >> Thanks
> >> _______________________________________________
> >> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> >> https://puck.nether.net/mailman/listinfo/cisco-nsp
> >> archive at http://puck.nether.net/pipermail/cisco-nsp/
> >>
> >> _______________________________________________
> > cisco-nsp mailing list  cisco-nsp at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-nsp
> > archive at http://puck.nether.net/pipermail/cisco-nsp/
> >
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/