[c-nsp] policy based routing & CPU / MEM

[Abello, Vinny]

Are you talking about using a policy map or simply a route-map on a BGP
neighbor? What exactly are you trying to accomplish? Are you trying to
change the next-hop based on the source address?

Vinny Abello
Network Engineer
Dell | Physician Services
office +1 973 940 6125
mobile +1 973 868 0610
vinny_abello at dell.com


-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Sharef Mustafa
Sent: Tuesday, November 30, 2010 10:28 AM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] policy based routing & CPU / MEM

I want to use route-maps and BGP to route traffic based on source IP, but
I'm not sure of it's impact on the performance of the box
I use cisco 7206 VXR NPE-G2 serving 2000 pppoe customers.

Did anyone try policy based routing (route maps with BGP) on such
environment?

if so what was it's impact on the CPU, memory and performance?

Thanks


Sharef
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/