[c-nsp] tracking

[jack daniels]

but in my case neighbouring device is IOS , how to use in this case ?
As IOS doesn't support BFD on static route.

On Sun, Oct 10, 2010 at 8:59 PM, Brad Hedlund (brhedlun)
<brhedlun at cisco.com> wrote:
> IOS XR supports BFD for static routes:
>
> https://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.3/interfaces/configuration/guide/hc33bfd.html#wp1112516
>
>
> Brad Hedlund
> --
> Sent from my mobile phone
> (please excuse brevity, typos)
>
> On Oct 10, 2010, at 10:10 AM, "jack daniels" <jckdaniels12 at gmail.com> wrote:
>
>> Hi guys,
>>
>> can I configure static route with track option in IOS XR , so as to
>> take out my static route from routing table if next hop (not directly
>> connected) not reachable.
>>
>> Regards
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>