[c-nsp] tracking

[Ryan West]

So, what is the other device and what code is it running?  BFD for static routes is supported in IOS depending on version.

-ryan

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of jack daniels
Sent: Sunday, October 10, 2010 12:52 PM
To: Brad Hedlund (brhedlun)
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] tracking

but in my case neighbouring device is IOS , how to use in this case ?
As IOS doesn't support BFD on static route.

On Sun, Oct 10, 2010 at 8:59 PM, Brad Hedlund (brhedlun) <brhedlun at cisco.com> wrote:
> IOS XR supports BFD for static routes:
>
> https://www.cisco.com/en/US/docs/ios_xr_sw/iosxr_r3.3/interfaces/confi
> guration/guide/hc33bfd.html#wp1112516
>
>
> Brad Hedlund
> --
> Sent from my mobile phone
> (please excuse brevity, typos)
>
> On Oct 10, 2010, at 10:10 AM, "jack daniels" <jckdaniels12 at gmail.com> wrote:
>
>> Hi guys,
>>
>> can I configure static route with track option in IOS XR , so as to 
>> take out my static route from routing table if next hop (not directly
>> connected) not reachable.
>>
>> Regards
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net 
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/