[c-nsp] Juniper Channelised STM-1

[sthaug at nethelp.no]

> I'm facing a issue where I have configured 3E1's on  channelised STM-1
> card of juniper between M320 (P router ) and M120 (PE router )
> 
> Is there any limitations that we can't use Channelised Stm-1 and
> configure E1 on MPLS core links ( P-P or PE-P)

Should work just fine. The capacity will, of course, be limited.

Steinar Haug, Nethelp consulting, sthaug at nethelp.no