[c-nsp] Juniper Channelised STM-1

[jack daniels]

Hi ,

vrf-table-label is not supported on channelised STM-1 on juniper. This
is the reaqson why cisco is best.

http://www.juniper.net/techpubs/software/junos/junos90/swconfig-vpns/other-limitations.html#id-10993840

On Thu, Oct 14, 2010 at 10:29 AM,  <sthaug at nethelp.no> wrote:
>> I'm facing a issue where I have configured 3E1's on  channelised STM-1
>> card of juniper between M320 (P router ) and M120 (PE router )
>>
>> Is there any limitations that we can't use Channelised Stm-1 and
>> configure E1 on MPLS core links ( P-P or PE-P)
>
> Should work just fine. The capacity will, of course, be limited.
>
> Steinar Haug, Nethelp consulting, sthaug at nethelp.no
>