[c-nsp] Using address-family context

[Pshem Kowalczyk]

Hi,

On 20 October 2010 03:39, Randy McAnally <rsm at fast-serv.com> wrote:
> Is it safe for existing BGP4 sessions/config without 'address-family xxxx'
> context to use the 'address-family ipv6 unicast' context to add a BGP6 peer
> for the first time?

Changing the list of advertised address-families will reset the BGP
session. If you have the routers peered with more then one neighbour
that should be safe. Just remember that the session is getting reset
the very moment you activate peer in the ipv6 address family.

kind regards
Pshem