[c-nsp] DS3 Nubie

[Jeff Wojciechowski]

All:

We are considering upgrading one of our circuits to a fractional DS3 and would just like query the experts on the list to make sure that I have all my bases covered here if we go down the DS3 route as I have never touched DS3 before...

I am considering using the following equipment:

3925 Router + NM-1T3/E3 + SM-NM-ADPTR (per http://www.cisco.com/en/US/prod/collateral/modules/ps2797/ps4909/product_data_sheet09186a008010fba2_ps282_Products_Data_Sheet.html)

That part seems pretty straightforward (but please correct me if I am wrong). Can I safely assume that since the carriers proposal doesn't mention ATM that I don't need NM-1A-T3/E3?

Then from DMARC to my router I need to use 734 type cable with 75 Ohm BNC connectors (per tread from yesterday).

Am I missing anything?

Thanks in advance,

Jeff Wojciechowski
LAN, WAN and Telephony Administrator
Midland Paper Company
101 E Palatine Rd
Wheeling, IL 60090
* tel: 847.777.2829
* fax: 847.403.6829
e-mail: jeff.wojciechowski at midlandpaper.com<mailto:jeff.wojciechowski at midlandpaper.com>
http://www.midlandpaper.com




  ________________________________
This electronic mail (including any attachments) may contain information that is privileged, confidential, or otherwise protected from disclosure to anyone other than its intended recipient(s). Any dissemination or use of this electronic mail or its contents (including any attachments) by persons other than the intended recipient(s) is strictly prohibited. If you have received this message in error, please delete the original message in its entirety (including any attachments) and notify us immediately by reply email so that we may correct our internal records. Midland Paper Company accepts no responsibility for any loss or damage from use of this electronic mail, including any damage resulting from a computer virus.