[c-nsp] NAT issue

[Keegan Holley]

What kind of problems do you see exactly?  Also what kind of nat are you
doing?  What kind of traffic pattern?  What does the translation table look
like right before you clear it?  There are limits to both address pools and
active translations so it may be as simple as expanding a pool or enabling
PAT.


On Sun, Sep 26, 2010 at 9:47 AM, Mohammad Khalil <eng_mssk at hotmail.com>wrote:

>
> Hi all
>
> i have configured NAT on Cisco 2811
> sometimes we face disconnections and the problem is resolved after clearing
> the NAT translations
>
> is that logic ? what is the best way to monitor the NAT translations ?
>
> Thanks
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>
>
>