[c-nsp] ASR1006 Router

[Renelson Panosky]

No, That's not it.  that's for the 3800 and 3900 series

On Thu, Sep 30, 2010 at 2:57 PM, Mack O'Brian <mackobrian40 at gmail.com>wrote:

> I believe it is card type command.
>
> config t#card type t3 0 3
>
>
>
>   On Thu, Sep 30, 2010 at 11:50 AM, Renelson Panosky <
> panocisco77 at gmail.com> wrote:
>
>>  I am configuring an ASR1006 with the following SPA cards installed.
>>
>> SPA-10X1GE-V2
>> SPA-4XT3/E3
>> SPA-8XCHT1/E1
>>
>> Do anybody know the command to type to make the router recognize the
>> following cards ?
>>
>>  SPA-4XT3/E3
>> SPA-8XCHT1/E1
>>
>> Because when i do sho ip int brief
>>
>> i only see the following
>>
>> Interface              IP-Address      OK? Method Status
>> Protocol
>> GigabitEthernet0/1/0   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/1   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/2   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/3   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/4   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/5   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/6   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/7   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/8   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/9   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0       unassigned      YES unset  administratively down
>> down
>>
>>
>> However, when i do a sho log i can see them.  Please help!
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>