[c-nsp] ASR1006 Router

[cisconsp at SecureObscure.com]

XYZ01-exacc-rtr01#show inventory | I SPA
NAME: "module 0", DESCR: "Cisco ASR1000 SPA Interface Processor 10"
NAME: "SPA subslot 0/0", DESCR: "5-port Gigabit Ethernet Shared Port
Adapter"
PID: SPA-5X1GE-V2      , VID: V02, SN: JAE1139YA4X
NAME: "SPA subslot 0/1", DESCR: "8-port Channelized T1/E1 to DS0 Shared Port
Adapter"
PID: SPA-8XCHT1/E1     , VID: V05, SN: JAE1344MT1W
NAME: "SPA subslot 0/2", DESCR: "4-port T3/E3 Serial Shared Port Adapter"
PID: SPA-4XT3/E3       , VID: V02, SN: JAE1343LZZ8
NAME: "SPA subslot 0/3", DESCR: "4-port OC3/STM1 POS Shared Port Adapter"
PID: SPA-4XOC3-POS     , VID: V01, SN: JAE13020E52

XYZ01-exacc-rtr01#show run | I card type
card type t1 0 1
card type t3 0 2

John

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Renelson Panosky
Sent: Thursday, September 30, 2010 2:26 PM
To: Mack O'Brian
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] ASR1006 Router

No, That's not it.  that's for the 3800 and 3900 series

On Thu, Sep 30, 2010 at 2:57 PM, Mack O'Brian <mackobrian40 at gmail.com>wrote:

> I believe it is card type command.
>
> config t#card type t3 0 3
>
>
>
>   On Thu, Sep 30, 2010 at 11:50 AM, Renelson Panosky <
> panocisco77 at gmail.com> wrote:
>
>>  I am configuring an ASR1006 with the following SPA cards installed.
>>
>> SPA-10X1GE-V2
>> SPA-4XT3/E3
>> SPA-8XCHT1/E1
>>
>> Do anybody know the command to type to make the router recognize the
>> following cards ?
>>
>>  SPA-4XT3/E3
>> SPA-8XCHT1/E1
>>
>> Because when i do sho ip int brief
>>
>> i only see the following
>>
>> Interface              IP-Address      OK? Method Status
>> Protocol
>> GigabitEthernet0/1/0   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/1   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/2   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/3   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/4   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/5   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/6   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/7   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/8   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0/1/9   unassigned      YES unset  administratively down
>> down
>> GigabitEthernet0       unassigned      YES unset  administratively down
>> down
>>
>>
>> However, when i do a sho log i can see them.  Please help!
>> _______________________________________________
>> cisco-nsp mailing list  cisco-nsp at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-nsp
>> archive at http://puck.nether.net/pipermail/cisco-nsp/
>>
>
>
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/