[c-nsp] LACP in 7206VXR with NPE-G1

[Pete Lumbis]

I have no idea if/whee this is supported on the 7200 but my first suggestion
would be to try T train code if you don't see it in mainline.

On Friday, August 26, 2011, Jay Hennigan <jay at west.net> wrote:
> I'm running IOS 12.4-12c advanced IP services.
>
> LACP is supposedly supported, and I can create a port-channel and add
> the gigabit ethernet interfaces to it.
>
> However, I can't find any of the LACP configuration commands such as
> mode active/passive, system-ID, etc.
>
> Any help would be appreciated.  I suspect I need a different IOS or
> possibly feature set, but have tried several with no success.   Bug
> toolkit returns nothing obvious.
>
> --
> Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
> Impulse Internet Service  -  http://www.impulse.net/
> Your local telephone and internet company - 805 884-6323 - WB6RDV
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>