[c-nsp] LACP in 7206VXR with NPE-G1

[Arie Vayner (avayner)]

Jay,

>From what I could find, LACP is not supported on 7200 (where did you see
a reference for it being supported?)
You could use PAgP if the other platform supports it...

Arie

-----Original Message-----
From: cisco-nsp-bounces at puck.nether.net
[mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Jay Hennigan
Sent: Saturday, August 27, 2011 00:55
To: 'cisco-nsp at puck.nether.net'
Subject: [c-nsp] LACP in 7206VXR with NPE-G1

I'm running IOS 12.4-12c advanced IP services.

LACP is supposedly supported, and I can create a port-channel and add
the gigabit ethernet interfaces to it.

However, I can't find any of the LACP configuration commands such as
mode active/passive, system-ID, etc.

Any help would be appreciated.  I suspect I need a different IOS or
possibly feature set, but have tried several with no success.   Bug
toolkit returns nothing obvious.

--
Jay Hennigan - CCIE #7880 - Network Engineering - jay at impulse.net
Impulse Internet Service  -  http://www.impulse.net/ Your local
telephone and internet company - 805 884-6323 - WB6RDV
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/