[c-nsp] Nexus enabling pathcost method long - documentation

[Tim Stevenson]

Ok thanks. Not sure who owns that document, it's 
definitely not part of the "offical" user 
documentation, but we'll track it down.

Tim


At 01:48 PM 12/1/2011, Mark Mason murmered:

>Tim-
>
>Below is the reference. Google has some other 
>folks tying to that same page. Fix that one, and fix all I guess.
>
><http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/C07-572834-00_STDG_NX-OS_vPC_DG.pdf>http://www.cisco.com/en/US/prod/collateral/switches/ps9441/ps9670/C07-572834-00_STDG_NX-OS_vPC_DG.pdf 
>- this has the incorrect data
>
>Mark Mason | Network Engineer, Adv | JHA Communications Infrastructure
>Jack Henry & Associates, Inc.® | 417.235.6652 x1520 | mmason at jackhenry.com
>
>"Decisions without actions are pointless. 
>Actions without decisions are reckless."
>
>
>-----Original Message-----
>From: Tim Stevenson [<mailto:tstevens at cisco.com>mailto:tstevens at cisco.com]
>Sent: Thursday, December 01, 2011 3:26 PM
>To: Mark Mason; cisco-nsp at puck.nether.net
>Subject: Re: [c-nsp] Nexus enabling pathcost method long - documentation
>
>Mark,
>
>What documents are you referring to? In the N7K 
>L2 config guide, the default port costs are 
>shown & appear to be correct. Please provide 
>pointers to any incorrect docs and we can have them checked/fixed.
>
><http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter7.html>http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter7.html
>
>http://www.cisco.com/en/US/docs/switches/datacenter/sw/5_x/nx-os/layer2/configuration/guide/Cisco_Nexus_7000_Series_NX-OS_Layer_2_Switching_Configuration_Guide_Release_5.x_chapter8.html#con_1706125
>
>Tim
>
>At 11:24 AM 12/1/2011, Mark Mason murmered:
>
> >In all the Nexus doc's for method long, I am seeing 20,000 as the
> >1x10Gb (10Gb total) cost and it should be 2,000. Furthermore, 2x10Gb
> >(20Gb total) is 1,000 and in the doc's it shows as 10,000. Can someone
> >from Cisco please clear up the design and configuration guides sooner
> >than later?
> >
> >Documents should be corrected with the following for long:
> >
> >10Gb - 2000
> >
> >20Gb - 1000
> >
> >40Gb - 500
> >
> >Anyone else see this in the doc's and have questions about it?
> >
> >Mark
> >
> >NOTICE: This electronic mail message and any files transmitted with it
> >are intended exclusively for the individual or entity to which it is
> >addressed.
> >The message,
> >together with any attachment, may contain confidential and/or
> >privileged information.
> >Any unauthorized review, use, printing, saving, copying, disclosure or
> >distribution is strictly prohibited. If you have received this message
> >in error, please immediately advise the sender by reply email and
> >delete all copies.
> >_______________________________________________
> >cisco-nsp mailing list  cisco-nsp at puck.nether.net
> ><<https://puck.nether.net/mailman/listinfo/cisc 
> o-nsp>https://puck.nether.net/mailman/listinfo/cisco-nsp>https://puck.nether
> >.net/mailman/listinfo/cisco-nsp
> >archive at
> ><<http://puck.nether.net/pipermail/cisco-nsp/>h 
> ttp://puck.nether.net/pipermail/cisco-nsp/>http://puck.nether.net/pip
> >ermail/cisco-nsp/
>
>
>
>
>Tim Stevenson, tstevens at cisco.com
>Routing & Switching CCIE #5561
>Distinguished Technical Marketing Engineer, 
>Cisco Nexus 7000 Cisco - 
><http://www.cisco.com>http://www.cisco.com IP Phone: 408-526-6759
>********************************************************
>The contents of this message may be *Cisco 
>Confidential* and are intended for the specified recipients only.
>
>
>NOTICE: This electronic mail message and any 
>files transmitted with it are intended
>exclusively for the individual or entity to 
>which it is addressed. The message,
>together with any attachment, may contain 
>confidential and/or privileged information.
>Any unauthorized review, use, printing, saving, 
>copying, disclosure or distribution
>is strictly prohibited. If you have received this message in error, please
>immediately advise the sender by reply email and delete all copies.




Tim Stevenson, tstevens at cisco.com
Routing & Switching CCIE #5561
Distinguished Technical Marketing Engineer, Cisco Nexus 7000
Cisco - http://www.cisco.com
IP Phone: 408-526-6759
********************************************************
The contents of this message may be *Cisco Confidential*
and are intended for the specified recipients only.